Intanto che sto cercando, hai provato a fare un reset generale alla centralina? C'e' il pulsante, sul fianco sinistro
Aggiunto dopo 47 minuti 24 secondi:
Bingo! spero...
3. Connect to your smartphone @ routing mode (STA), program and download .
a. When TC421 has connected to your phone in the AP mode, please enter SSID, password, encrypt-type and encrypt-method of your home router in the setting interface. If there is not password, please click this button15.jpg beside the SSID input box. And then click “join router”, at this time, TC421 will beep one time, and the screen display “Set:station...”. // For SSID, please pay attention to distinguish the capital and lowercase, even the symbol. If you do not know the encrypt-type and encrypt-method, you can try to choose WPA-PAK/WPA2-PSK and AES.
b. Switch the WIFI network of your phone to home network, open SmartTimer APP again, and click the Search button on the right up corner. If connected successfully, TC421 will beep twice, and display on the software. // If it fails to connect, please check your home network information and confirm whether it is correct or not. If yes, please repeat the above steps b.
c. After that, you can continue to operate it reference like AP mode.
Note: If TC421 is connected to the home network successfully, you can click the Search button of the software interface on others phones which are also connected to this home network, and then you can find out TC421.
4. Connect to your computer via wifi, programming and download on the computer.
a. When TC421 is connected to home WIFI network, open the ledcontrol V2.1 software. // Please confirm the computer and this TC421 are connected to the same home network.
b. Please click as follow: Control-> Search Network Device, and click Search on the pop-up window. After search successfully, the listing will show TC421 which has been connected to this network., and then click TC421 which you want to program, after that, click OK.
c. You can continue following the steps of the program and download like connects to computer via USB.
Note: If you want to program and download by connecting router to your computer, you need to set your home WIFI information in the AP mode on your phone. After TC421 successfully is connected to home WIFI, you can operate it on your computer.
Fonte/Credit:
http://www.worlduniqueen.com/support_li ... &typeid=15
